Favourites
For Word
[n] L. Bobb, “Beam instrumentation for advancing accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3916-3920. doi:10.18429/JACoW-IPAC2024-FRXN1
[n] K. B. Scheidt, “Newly Developed 6mm Buttons for the BPMs in the ESRF Low-Emittance-Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF14, pp. 346-350.
[n] J. Meissburger, G. P. A. Berg, W. H??rlimann, S. A. Martin, and J. G. M. R?Âmer, “Concepts of Operation for the Magnet Spectrometer Big Karl”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J25, pp. 424-427.
[n] C. Bloomer, L. Bobb, and M. E. Newton, “100Hz X-ray Beam Profile Measurements from a Transmissive CVD Diamond Detector”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 387-391. doi:10.18429/JACoW-IBIC2023-WEP021
[n] P. Klysubun, T. Pulampong, and P. Sudmuang, “Design and Optimisation of SPS-II Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2773-2775. doi:10.18429/JACoW-IPAC2017-WEPAB086
[n] M. Major et al., “Structural Investigation of Nitrogen-Doped Niobium for SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 581. doi:10.18429/JACoW-SRF2021-WEPFDV010
[n] G. P. A. Berg et al., “Modes of Operation for the Cooler Ring COSY”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper O04, pp. 601-604.
[n] I. Rodriguez et al., “FFA magnet prototype for high intensity pulsed proton driver”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2261-2264. doi:10.18429/JACoW-IPAC2023-TUPM032
[n] R. D. Ruth et al., “Results from the SLAC NLC Test Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B004, pp. 439-443.
[n] J. N. Vitale, “The Yale Drift Tube Linac”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 6-02, pp. 221-230.
[n] J. F. Muratore et al., “Test Results for Initial Production of LHC Insertion Region Dipole Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE023, pp. 2415-2417.
[n] J. M. Brennan et al., “Design of the AGS Booster Beam Position Monitor System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1536-1539.
[n] H. O. Moser et al., “ANKA, A Synchrotron Light Source for Microstructure Fabrication and Analysis”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR06, pp. 272-274.
[n] V. Serriere and J. Jacob, “Non-Linear Longitudinal Beam Dynamics with Harmonic RF Systems for Bunch Lengthening”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG008, pp. 3192-3194.
[n] A. N. Stillman, R. E. Thern, W. H. Van Zwienen, and R. L. Witkover, “Design of the AGS Booster Ionization Profile Monitor”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1189-1192.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Bobb, “Beam instrumentation for advancing accelerators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper FRXN1, pp. 3916-3920.
- K. B. Scheidt, “Newly Developed 6mm Buttons for the BPMs in the ESRF Low-Emittance-Ring”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF14, pp. 346-350.
- J. Meissburger, G. P. A. Berg, W. H??rlimann, S. A. Martin, and J. G. M. R?Âmer, “Concepts of Operation for the Magnet Spectrometer Big Karl”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J25, pp. 424-427.
- C. Bloomer, L. Bobb, and M. E. Newton, “100Hz X-ray Beam Profile Measurements from a Transmissive CVD Diamond Detector”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP021, pp. 387-391.
- P. Klysubun, T. Pulampong, and P. Sudmuang, “Design and Optimisation of SPS-II Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2773-2775.
- M. Major et al., “Structural Investigation of Nitrogen-Doped Niobium for SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 581.
- G. P. A. Berg et al., “Modes of Operation for the Cooler Ring COSY”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper O04, pp. 601-604.
- I. Rodriguez et al., “FFA magnet prototype for high intensity pulsed proton driver”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM032, pp. 2261-2264.
- R. D. Ruth et al., “Results from the SLAC NLC Test Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5B004, pp. 439-443.
- J. N. Vitale, “The Yale Drift Tube Linac”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 6-02, pp. 221-230.
- J. F. Muratore et al., “Test Results for Initial Production of LHC Insertion Region Dipole Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE023, pp. 2415-2417.
- J. M. Brennan et al., “Design of the AGS Booster Beam Position Monitor System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1536-1539.
- H. O. Moser et al., “ANKA, A Synchrotron Light Source for Microstructure Fabrication and Analysis”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR06, pp. 272-274.
- V. Serriere and J. Jacob, “Non-Linear Longitudinal Beam Dynamics with Harmonic RF Systems for Bunch Lengthening”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG008, pp. 3192-3194.
- A. N. Stillman, R. E. Thern, W. H. Van Zwienen, and R. L. Witkover, “Design of the AGS Booster Ionization Profile Monitor”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1189-1192.
Back to search
