Favourites
For Word
[n] M. Schütte, J. Georg, A. Grünhagen, and H. Schlarb, “Concept and Design of an Extensible Middle-Layer Application Framework for Accelerator Operations and Development”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 30-33. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO02
[n] J. Jones, B. Hounsell, B. Muratori, and J. McKenzie, “Beam dynamics for the RUEDI microscopy beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2067-2070. doi:10.18429/JACoW-IPAC2023-TUPL142
[n] B. Rachmilowitz et al., “Large-area atomic layer deposition of titanium nitride for RF windows”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2668-2669. doi:10.18429/JACoW-IPAC2025-THPB094
[n] T. Taylor, B. G. Chidley, and G. E. McMichael, “Design Recommendations for Low-Energy Components of ESNIT and OMEGA”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-17, pp. 651-653.
[n] F. Klarner, S. Aderhold, O. Boldt, W. Hillert, N. Hofmann, and D. Krönung, “Detailed Studies Regarding the New Injection System at the LINAC I at ELSA”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP112, pp. 325-327.
[n] M. A. Allen, L. G. Karvonen, R. A. McConnell, and H. Schwarz, “Operation of PEP Longitudinal Feedback System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2317-2320.
[n] P. Owusu et al., “MTE measurements at the ASU cryogenically cooled DC electron gun”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2755-2757. doi:10.18429/JACoW-IPAC2025-THPM034
[n] A. C. Rodriguez Alicea, O. Chubenko, L. Cultrera, S. S. Karkare, and R. Palai, “Spin-Polarized Electron Photoemission and Detection Studies”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 26-29. doi:10.18429/JACoW-NAPAC2022-MOYE6
[n] D. Dunning et al., “Conclusions from the UK XFEL conceptual design and options analysis study”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 157-160. doi:10.18429/JACoW-IPAC2025-MOPB042
[n] F. Klarner, S. Aderhold, O. Boldt, and W. Hillert, “The New Single Bunch Injector for ELSA”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP005, pp. 392-394.
[n] A. Perin, B. Bradu, J. Bremer, S. Claudet, D. Delikaris, and F. Ferrand, “Cryogenic eficiency and sustainability aspects for particle accelerators & detectors”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1691-1694. doi:10.18429/JACoW-IPAC2025-WEBD1
[n] J. T. Seeman et al., “Alignment Issues of the SLC Linac Accelerating Structure”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2949-2952.
[n] D. Dunning et al., “An introduction to the UK XFEL conceptual design and options analysis”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1909-1912. doi:10.18429/JACoW-IPAC2023-TUPL071
[n] G. Marotta, C. Baffa, G. Brajnik, M. Colciago, E. Giani, and I. Novak, “Strategy and Tools to Test Software in the SKA Project: The CSP. LMC Case”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 34-39. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO03
[n] T. Luo and D. Merenich, “Conceptual design of an 805 MHz cavity with beryllium windows and distributed coupling”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1444-1447. doi:10.18429/JACoW-IPAC2024-TUPR12
[n] H. Witte et al., “Progress on the design of the interaction region of the Electron-Ion Collider EIC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 238-241. doi:10.18429/JACoW-IPAC2024-MOPC75
[n] M. Abbaslou et al., “Design considerations for a proton linac for a compact accelerator based neutron source for Canada”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOC02, unpublished.
[n] M. Martinez-Calderon et al., “Prformance of laser patterned copper plasmonic photocathodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1358-1361. doi:10.18429/JACoW-IPAC2023-TUPA003
[n] O. Kester, D. Marquardt, M. Abbaslou, A. Gottberg, and R. Laxdal, “Development of compact accelerator based neutron sources for Canada, the PC-CANS project”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 323-326. doi:10.18429/JACoW-HIAT2025-FRB02
[n] A. Alexander et al., “Update on the status of the C-band high gradient program at LANL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2057-2060. doi:10.18429/JACoW-IPAC2023-TUPL138
[n] J. Wolfenden, C. Swain, C. Welsch, and T. Pacey, “Optical pepper-pots: developing single-shot emittance diagnostics”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3966-3969. doi:10.18429/JACoW-IPAC2023-THPA009
[n] G. Ganetis et al., “B" Series RHIC Arc Quadrupoles"”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2766-2769.
[n] K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2060-2063. doi:10.18429/JACoW-IPAC2024-WEPC43
[n] M. Kaemingk, P. Anisimov, E. Simakov, and H. Xu, “Update on multi-objective genetic optimizations of the photoinjector for CARIE”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2439-2442. doi:10.18429/JACoW-IPAC2025-WEPS113
[n] D. Franklin, T. Arias, O. Chubenko, and T. Wu, “Studying photoemissive properties of stable Cs-Sb compound thin-film photocathodes using a combination of Monte Carlo simulations and Density Functional Theory”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1263-1265. doi:10.18429/JACoW-IPAC2025-TUPM049
[n] S. M. Lidia, “Beam Diagnostics for FRIB Commissioning”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper MO2I1, unpublished.
[n] U. Y. Yilmaz, M. G. P. T, and M. J. A. de Beer, “Driving Behavioural Change of Software Developers in a Global Organisation Assisted by a Paranoid Android”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 25-29. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO01
[n] K. Wakonig et al., “A Beamline and Experiment Control System for the SLS 2.0”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 71-77. doi:10.18429/JACoW-ICALEPCS2023-MO2AO02
[n] S. M. Lidia and R. D. Ryne, “Relativistic Klystron Two-Beam Accelerator Simulation Code Development”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P106, pp. 2624-2626.
[n] W. Chou, “Choice of the RF Cavity for the SSC Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 818-821.
[n] A. Schempp et al., “Experiments with the High Current RFQ Prototype for GSI”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3139-3142.
[n] D. Garcia, G. Adhikari, P. Musumeci, and T. Vecchione, “Wafer-compatible photocathode plug design for high gradient RF photoinjector”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1464-1466. doi:10.18429/JACoW-IPAC2025-TUPS024
[n] R. Rimmer et al., “Higher Order Mode Damping Studies on the PEP-II B-Factory RF Cavity”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1289-1292.
[n] N. Pogue et al., “Diagnostic Suite for High Power Electron Beams”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL130, unpublished.
[n] W. Chou, “Review of Beam Instability Studies for the SSC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ15, pp. 2983-2985.
[n] A. S. Fisher et al., “Design of an X-ray Imaging System for the Low-Energy Ring of PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT154, pp. 2819-2821.
[n] I. Vasserman et al., “Experimental Study of Collective Effects in BEP Storage Ring with High Stored Current”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3711-3714.
[n] D. Boussard and E. Onillon, “Damping of Phase Errors at Injection in the LHC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2379-2382.
[n] J. Safranek and M. H. Donald, “Optics Characterization and Correction at PEP-II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP46, pp. 1584-1586.
[n] K. Bane et al., “High-Intensity Single Bunch Instability Behavior In The New SLC Damping Ring Vacuum Chamber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC17, pp. 3109-3111.
[n] E. Onillon and J. M. Brennan, “The New Booster Synchronization Loop”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ25, pp. 2723-2725.
[n] M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished.
[n] G. Torrisi et al., “Plasma Heating and Innovative Microwave Launching in ECRIS: Models and Experiments”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 63-66. doi:10.18429/JACoW-ECRIS2018-TUB2
[n] D. Gordon, C. E. Clayton, W. B. Mori, C. Joshi, and T. Katsouleas, “Optical Bunching of Relativistic Electrons for Injection into a GeV Plasma Beatwave Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V017, pp. 681-683.
[n] I. Ben-Zvi et al., “Design and Construction of a High-Duty-Factor Photocathode Electron Gun”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3012-3015.
[n] K. E. Deitrick et al., “A Hard X-Ray Compton Source at CBETA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3765-3768. doi:10.18429/JACoW-IPAC2021-THPAB009
[n] I. Draganic, H. Andrews, J. Gioia, J. Hollabaugh, and M. Chavez, “High vacuum measurements at a linear inductive accelerator module”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR65, unpublished.
[n] B. Muratori, J. Crone, J. Jones, T. Pacey, D. Symes, and H. Owen, “The EPAC electron transport beamline - physics considerations and design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1553-1556. doi:10.18429/JACoW-IPAC2023-TUPA105
[n] S. A. Wolbers et al., “Tevatron Beam Position Monitor Upgrade”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPC004, pp. 410-412.
[n] K. Harris, M. Artusy, A. Donaldson, and T. Mattison, “High Voltage Pulse Cable and Connector Experience in the Kicker Systems at SLAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3159-3162.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Schütte, J. Georg, A. Grünhagen, and H. Schlarb, “Concept and Design of an Extensible Middle-Layer Application Framework for Accelerator Operations and Development”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO02, pp. 30-33.
- J. Jones, B. Hounsell, B. Muratori, and J. McKenzie, “Beam dynamics for the RUEDI microscopy beamline”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL142, pp. 2067-2070.
- B. Rachmilowitz et al., “Large-area atomic layer deposition of titanium nitride for RF windows”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB094, pp. 2668-2669.
- T. Taylor, B. G. Chidley, and G. E. McMichael, “Design Recommendations for Low-Energy Components of ESNIT and OMEGA”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-17, pp. 651-653.
- F. Klarner, S. Aderhold, O. Boldt, W. Hillert, N. Hofmann, and D. Krönung, “Detailed Studies Regarding the New Injection System at the LINAC I at ELSA”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP112, pp. 325-327.
- M. A. Allen, L. G. Karvonen, R. A. McConnell, and H. Schwarz, “Operation of PEP Longitudinal Feedback System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2317-2320.
- P. Owusu et al., “MTE measurements at the ASU cryogenically cooled DC electron gun”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM034, pp. 2755-2757.
- A. C. Rodriguez Alicea, O. Chubenko, L. Cultrera, S. S. Karkare, and R. Palai, “Spin-Polarized Electron Photoemission and Detection Studies”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 26-29.
- D. Dunning et al., “Conclusions from the UK XFEL conceptual design and options analysis study”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB042, pp. 157-160.
- F. Klarner, S. Aderhold, O. Boldt, and W. Hillert, “The New Single Bunch Injector for ELSA”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP005, pp. 392-394.
- A. Perin, B. Bradu, J. Bremer, S. Claudet, D. Delikaris, and F. Ferrand, “Cryogenic eficiency and sustainability aspects for particle accelerators & detectors”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEBD1, pp. 1691-1694.
- J. T. Seeman et al., “Alignment Issues of the SLC Linac Accelerating Structure”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2949-2952.
- D. Dunning et al., “An introduction to the UK XFEL conceptual design and options analysis”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL071, pp. 1909-1912.
- G. Marotta, C. Baffa, G. Brajnik, M. Colciago, E. Giani, and I. Novak, “Strategy and Tools to Test Software in the SKA Project: The CSP. LMC Case”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO03, pp. 34-39.
- T. Luo and D. Merenich, “Conceptual design of an 805 MHz cavity with beryllium windows and distributed coupling”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR12, pp. 1444-1447.
- H. Witte et al., “Progress on the design of the interaction region of the Electron-Ion Collider EIC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC75, pp. 238-241.
- M. Abbaslou et al., “Design considerations for a proton linac for a compact accelerator based neutron source for Canada”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOC02, unpublished.
- M. Martinez-Calderon et al., “Prformance of laser patterned copper plasmonic photocathodes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA003, pp. 1358-1361.
- O. Kester, D. Marquardt, M. Abbaslou, A. Gottberg, and R. Laxdal, “Development of compact accelerator based neutron sources for Canada, the PC-CANS project”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper FRB02, pp. 323-326.
- A. Alexander et al., “Update on the status of the C-band high gradient program at LANL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL138, pp. 2057-2060.
- J. Wolfenden, C. Swain, C. Welsch, and T. Pacey, “Optical pepper-pots: developing single-shot emittance diagnostics”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA009, pp. 3966-3969.
- G. Ganetis et al., “B" Series RHIC Arc Quadrupoles"”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2766-2769.
- K. P. Mondal, R. Begay, J. Biswas, L. Cultrera, M. Gaowei, and J. Walsh, “An upgrade for the CeC cathode deposition system: co-deposition of K₂CsSb and CsTe/GaAs for CeC use”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC43, pp. 2060-2063.
- M. Kaemingk, P. Anisimov, E. Simakov, and H. Xu, “Update on multi-objective genetic optimizations of the photoinjector for CARIE”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS113, pp. 2439-2442.
- D. Franklin, T. Arias, O. Chubenko, and T. Wu, “Studying photoemissive properties of stable Cs-Sb compound thin-film photocathodes using a combination of Monte Carlo simulations and Density Functional Theory”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM049, pp. 1263-1265.
- S. M. Lidia, “Beam Diagnostics for FRIB Commissioning”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper MO2I1, unpublished.
- U. Y. Yilmaz, M. G. P. T, and M. J. A. de Beer, “Driving Behavioural Change of Software Developers in a Global Organisation Assisted by a Paranoid Android”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO01, pp. 25-29.
- K. Wakonig et al., “A Beamline and Experiment Control System for the SLS 2.0”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2AO02, pp. 71-77.
- S. M. Lidia and R. D. Ryne, “Relativistic Klystron Two-Beam Accelerator Simulation Code Development”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P106, pp. 2624-2626.
- W. Chou, “Choice of the RF Cavity for the SSC Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 818-821.
- A. Schempp et al., “Experiments with the High Current RFQ Prototype for GSI”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3139-3142.
- D. Garcia, G. Adhikari, P. Musumeci, and T. Vecchione, “Wafer-compatible photocathode plug design for high gradient RF photoinjector”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS024, pp. 1464-1466.
- R. Rimmer et al., “Higher Order Mode Damping Studies on the PEP-II B-Factory RF Cavity”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1289-1292.
- N. Pogue et al., “Diagnostic Suite for High Power Electron Beams”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL130, unpublished.
- W. Chou, “Review of Beam Instability Studies for the SSC”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ15, pp. 2983-2985.
- A. S. Fisher et al., “Design of an X-ray Imaging System for the Low-Energy Ring of PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT154, pp. 2819-2821.
- I. Vasserman et al., “Experimental Study of Collective Effects in BEP Storage Ring with High Stored Current”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3711-3714.
- D. Boussard and E. Onillon, “Damping of Phase Errors at Injection in the LHC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2379-2382.
- J. Safranek and M. H. Donald, “Optics Characterization and Correction at PEP-II”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP46, pp. 1584-1586.
- K. Bane et al., “High-Intensity Single Bunch Instability Behavior In The New SLC Damping Ring Vacuum Chamber”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC17, pp. 3109-3111.
- E. Onillon and J. M. Brennan, “The New Booster Synchronization Loop”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ25, pp. 2723-2725.
- M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished.
- G. Torrisi et al., “Plasma Heating and Innovative Microwave Launching in ECRIS: Models and Experiments”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 63-66.
- D. Gordon, C. E. Clayton, W. B. Mori, C. Joshi, and T. Katsouleas, “Optical Bunching of Relativistic Electrons for Injection into a GeV Plasma Beatwave Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V017, pp. 681-683.
- I. Ben-Zvi et al., “Design and Construction of a High-Duty-Factor Photocathode Electron Gun”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3012-3015.
- K. E. Deitrick et al., “A Hard X-Ray Compton Source at CBETA”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3765-3768.
- I. Draganic, H. Andrews, J. Gioia, J. Hollabaugh, and M. Chavez, “High vacuum measurements at a linear inductive accelerator module”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR65, unpublished.
- B. Muratori, J. Crone, J. Jones, T. Pacey, D. Symes, and H. Owen, “The EPAC electron transport beamline - physics considerations and design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA105, pp. 1553-1556.
- S. A. Wolbers et al., “Tevatron Beam Position Monitor Upgrade”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPC004, pp. 410-412.
- K. Harris, M. Artusy, A. Donaldson, and T. Mattison, “High Voltage Pulse Cable and Connector Experience in the Kicker Systems at SLAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3159-3162.
Back to search