Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Johnstone and S. R. Koscielniak, “New Nonscaling FFAG for Medical Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN103, pp. 2951-2953.
[n] S. Joly et al., “A High-Brightness Photo-Injector for a Free Electron Laser Proposal”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 257-260.
[n] E. Hamwi et al., “Minimizing dispersion through resonant extraction for BNL's NSRL”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP043, unpublished.
[n] D. Kraemer, “Status of the High Brilliance Synchrotron Radiation Source BESSY II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP002G, pp. 605-607.
[n] J. Frehaut et al., “Beam Dynamics Studies in a Low-Frequency High-Peak power Laser-Driven RF Gun”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 691-694.
[n] J. R. Nasiatka, O. Omolayo, H. A. Padmore, and S. S. Soezeri, “Development of Low Vibration Cooling Systems for Beamline Optics Using Heat Pipe Technology”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 331-335. doi:10.18429/JACoW-MEDSI2018-THOPMA06
[n] S. Vilcins, M. Holz, M. Lemke, D. Noelle, and Ch. Wiebers, “The Influences of Material Properties to Micro Damages on Vacuum Chamber CF Flanges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 63-70. doi:10.18429/JACoW-MEDSI2016-MOPE27
[n] C. Montag and F. Stulle, “Simulation of Orbit Correction and Synchrotron Radiation Aspects in the Upgraded HERA Interaction Regions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B12, pp. 370-372.
[n] C. Feng, H. Xu, and Z. Zhao, “Zeptosecond γ-Ray Pulses Generation via FEL-Driven Microbunching and Laser-Compton Scattering”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2654, unpublished.
[n] Y. Tokpanov, V. A. Lebedev, and W. Pellico, “Measurements of Magnetic Permeability of Soft Steel at High Frequencies”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD079, pp. 2711-2713.
[n] T. K. Charles and A. Castilla, “Preliminary Investigation into Accelerators for In-Situ Cultural Heritage Research”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2605-2608. doi:10.18429/JACoW-IPAC2021-WEPAB012
[n] W. W. MacKay et al., “Spin Dynamics in AGS and RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAB008, pp. 405-409.
[n] D. Kraemer et al., “Start of Commissioning of the High Brilliance Synchrotron Light Source BESSY II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUOB03A, pp. 262-264.
[n] S. R. Koscielniak and C. Johnstone, “Analytic Models for Quadrupole Fringe-Field Effects”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN001, pp. 1386-1388.
[n] J. M. Byrd, S. DeSantis, D. Li, G. Stupakov, and F. Zimmermann, “Nonlinear Longitudinal Dynamics Studies at the ALS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECR3, pp. 382-386.
[n] A. S. Thakur, G. Burt, W. L. Millar, I. Syratchev, and Z. Un Nisa, “Design of an RF-gridded gun for a high-efficiency tristron”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7192, unpublished.
[n] C. Johnstone and B. Autin, “Large Acceptance Muon Storage Rings for Neutrino Production: Lattice Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP51, pp. 3071-3073.
[n] Y. Jongen et al., “Progress Report on the Construction of the Northeast Proton Therapy Center (NPTC) Equipment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P103, pp. 3816-3818.
[n] C. Johnstone et al., “Advanced Simulation and Optimization Tools for Dynamic Aperture of Non-Scaling FFAGs and Related Accelerators Including Modern User Interfaces”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3PBC05, pp. 1907-1909.
[n] P. Kuske, “CSR-Driven Longitudinal Single Bunch Instability with Negative Momentum Compaction Factor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1651-1654. doi:10.18429/JACoW-IPAC2016-TUPOR003
[n] Y. Shobuda, J. Kamiya, K. Moriya, and K. Okabe, “Coupling Impedance of the Collimator Without RF-Shields at the RCS in J-PARC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 163-166. doi:10.18429/JACoW-IPAC2019-MOPGW035
[n] J. J. Knopp, “Notch Geometry Optimization of APS Upgrade High Heat Load Mirror Systems”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPC06, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Johnstone and S. R. Koscielniak, “New Nonscaling FFAG for Medical Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN103, pp. 2951-2953.
- S. Joly et al., “A High-Brightness Photo-Injector for a Free Electron Laser Proposal”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 257-260.
- E. Hamwi et al., “Minimizing dispersion through resonant extraction for BNL's NSRL”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP043, unpublished.
- D. Kraemer, “Status of the High Brilliance Synchrotron Radiation Source BESSY II”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP002G, pp. 605-607.
- J. Frehaut et al., “Beam Dynamics Studies in a Low-Frequency High-Peak power Laser-Driven RF Gun”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 691-694.
- J. R. Nasiatka, O. Omolayo, H. A. Padmore, and S. S. Soezeri, “Development of Low Vibration Cooling Systems for Beamline Optics Using Heat Pipe Technology”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 331-335.
- S. Vilcins, M. Holz, M. Lemke, D. Noelle, and Ch. Wiebers, “The Influences of Material Properties to Micro Damages on Vacuum Chamber CF Flanges”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 63-70.
- C. Montag and F. Stulle, “Simulation of Orbit Correction and Synchrotron Radiation Aspects in the Upgraded HERA Interaction Regions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B12, pp. 370-372.
- C. Feng, H. Xu, and Z. Zhao, “Zeptosecond γ-Ray Pulses Generation via FEL-Driven Microbunching and Laser-Compton Scattering”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2654, this conference.
- Y. Tokpanov, V. A. Lebedev, and W. Pellico, “Measurements of Magnetic Permeability of Soft Steel at High Frequencies”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD079, pp. 2711-2713.
- T. K. Charles and A. Castilla, “Preliminary Investigation into Accelerators for In-Situ Cultural Heritage Research”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2605-2608.
- W. W. MacKay et al., “Spin Dynamics in AGS and RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAB008, pp. 405-409.
- D. Kraemer et al., “Start of Commissioning of the High Brilliance Synchrotron Light Source BESSY II”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUOB03A, pp. 262-264.
- S. R. Koscielniak and C. Johnstone, “Analytic Models for Quadrupole Fringe-Field Effects”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN001, pp. 1386-1388.
- J. M. Byrd, S. DeSantis, D. Li, G. Stupakov, and F. Zimmermann, “Nonlinear Longitudinal Dynamics Studies at the ALS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WECR3, pp. 382-386.
- A. S. Thakur, G. Burt, W. L. Millar, I. Syratchev, and Z. Un Nisa, “Design of an RF-gridded gun for a high-efficiency tristron”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7192, this conference.
- C. Johnstone and B. Autin, “Large Acceptance Muon Storage Rings for Neutrino Production: Lattice Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP51, pp. 3071-3073.
- Y. Jongen et al., “Progress Report on the Construction of the Northeast Proton Therapy Center (NPTC) Equipment”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P103, pp. 3816-3818.
- C. Johnstone et al., “Advanced Simulation and Optimization Tools for Dynamic Aperture of Non-Scaling FFAGs and Related Accelerators Including Modern User Interfaces”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3PBC05, pp. 1907-1909.
- P. Kuske, “CSR-Driven Longitudinal Single Bunch Instability with Negative Momentum Compaction Factor”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1651-1654.
- Y. Shobuda, J. Kamiya, K. Moriya, and K. Okabe, “Coupling Impedance of the Collimator Without RF-Shields at the RCS in J-PARC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 163-166.
- J. J. Knopp, “Notch Geometry Optimization of APS Upgrade High Heat Load Mirror Systems”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPC06, pp. XX-XX.
Back to search