Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. E. Spencer, R. J. England, C.-K. Ng, R. J. Noble, Z. Wu, and D. Xu, “Coupler Studies for PBG Fiber Accelerators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP136, pp. 346-348.
[n] G. Rakowsky, “Enhancement of NSLS Sextupoles Using Permanent Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH012, pp. 3242-3244.
[n] G. H. Gillespie, B. W. Hill, and J. M. Moore, “Using Trace 3-D in the Particle Beam Optics Laboratory (PBO Lab)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB13, pp. 824-826.
[n] M. Otani et al., “Disk and Washer Coupled Cavity Linac Design and Cold-Model for Muon Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1924-1927. doi:10.18429/JACoW-IPAC2019-TUPRB117
[n] J. B. van der Laan et al., “Bates South Hall Ring Commissioning for Internal Target Experiments”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG028, pp. 2324-2326.
[n] S. Hancock, P. Knaus, and M. Lindroos, “Tomographic Measurements of Longitudinal Phase Space Density”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08H, pp. 1520-1522.
[n] C. Emma, C. Pellegrini, M. W. Guetg, A. A. Lutman, A. Marinelli, and J. Wu, “High Efficiency, High Brightness X-ray Free Electron Lasers via Fresh Bunch Self-Seeding”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 805-808. doi:10.18429/JACoW-IPAC2016-MOPOW040
[n] C. McGuinness et al., “Fabrication and Measurements of a Silicon Woodpile Accelerator Structure”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP133, pp. 343-345.
[n] R. Giacone et al., “Simulations of Laser Pulse Coupling and Transmission Efficiency in Plasma Channels”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE031, pp. 2179-2181.
[n] M. Apollonio, ?à. Andersson, M. Brosi, D. K. Olsson, P. F. Tavares, and A. S. Vorozhtsov, “Beam Dynamics of the Transparent Injection for the MAX IV 1.5 GeV Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 284-287. doi:10.18429/JACoW-IPAC2022-MOPOPT022
[n] R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
[n] M. Mohamadian, H. Afarideh, M. Salehi, J.-S. Chai, and M. Ghergherehchi, “Development of Optimized RF Cavity in 10 MeV Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1250-1252. doi:10.18429/JACoW-IPAC2016-TUPMR011
[n] Z. Qian, M. Champion, H. W. Miller, A. Moretti, and R. Padilla, “Final Module Tuning of the 805 MHz Side-Coupled Cavities for the Fermilab Linac Upgrade”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-44, pp. 422-424.
[n] I. Yamane and Y. Yamaguchi, “Stripping Carbon Foils for H-Charge-Exchange Injection into the KEK-PS Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1948-1951.
[n] K.Nakanishi; K.Hara; A.Honma; K.Hosoyama; A.Kabe; Y.Kojima; H.Nakai; K.Akai; K.Ebihara; T.Furuya; S.Mitsunobu; Y.Morita; M.Ono; Y.Yamamoto, “COMMISSIONING OF CRAB CAVITY SYSTEM”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH04, pp. XX-XX.
[n] D. Kr?ñmer, “Experience with Industry during the Construction of a Large Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEILA005, pp. 190-192.
[n] B. N. Lee, J.-S. Chai, H. W. Kim, J. H. Oh, and H. S. Song, “Design study of Electromagnet for 13MeV PET Cyclotron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO011, pp. 2415-2417.
[n] M. Olveg?Ñrd et al., “Spectrometry in the Test Beam Line at CTF3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE060, pp. 1113-1115.
[n] V. Talanov et al., “A Beam Loss Scintillator System for Background Monitoring at the LHCb Experiment”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHA03, pp. 286-288.
[n] D. K. Olsson, “Nonlinear Optics from Off-Energy Closed Orbits”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper TUZE2, unpublished.
[n] C. Gaspar et al., “The LHCb Experiment Control System: on the Path to Full Automation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST06, pp. 20-23.
For LaTeX
Use Complete Form
For BibTeX
References
- J. E. Spencer, R. J. England, C.-K. Ng, R. J. Noble, Z. Wu, and D. Xu, “Coupler Studies for PBG Fiber Accelerators”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP136, pp. 346-348.
- G. Rakowsky, “Enhancement of NSLS Sextupoles Using Permanent Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH012, pp. 3242-3244.
- G. H. Gillespie, B. W. Hill, and J. M. Moore, “Using Trace 3-D in the Particle Beam Optics Laboratory (PBO Lab)”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB13, pp. 824-826.
- M. Otani et al., “Disk and Washer Coupled Cavity Linac Design and Cold-Model for Muon Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1924-1927.
- J. B. van der Laan et al., “Bates South Hall Ring Commissioning for Internal Target Experiments”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG028, pp. 2324-2326.
- S. Hancock, P. Knaus, and M. Lindroos, “Tomographic Measurements of Longitudinal Phase Space Density”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08H, pp. 1520-1522.
- C. Emma, C. Pellegrini, M. W. Guetg, A. A. Lutman, A. Marinelli, and J. Wu, “High Efficiency, High Brightness X-ray Free Electron Lasers via Fresh Bunch Self-Seeding”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 805-808.
- C. McGuinness et al., “Fabrication and Measurements of a Silicon Woodpile Accelerator Structure”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP133, pp. 343-345.
- R. Giacone et al., “Simulations of Laser Pulse Coupling and Transmission Efficiency in Plasma Channels”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE031, pp. 2179-2181.
- M. Apollonio, ?à. Andersson, M. Brosi, D. K. Olsson, P. F. Tavares, and A. S. Vorozhtsov, “Beam Dynamics of the Transparent Injection for the MAX IV 1.5 GeV Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 284-287.
- R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
- M. Mohamadian, H. Afarideh, M. Salehi, J.-S. Chai, and M. Ghergherehchi, “Development of Optimized RF Cavity in 10 MeV Cyclotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1250-1252.
- Z. Qian, M. Champion, H. W. Miller, A. Moretti, and R. Padilla, “Final Module Tuning of the 805 MHz Side-Coupled Cavities for the Fermilab Linac Upgrade”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-44, pp. 422-424.
- I. Yamane and Y. Yamaguchi, “Stripping Carbon Foils for H-Charge-Exchange Injection into the KEK-PS Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1948-1951.
- K.Nakanishi; K.Hara; A.Honma; K.Hosoyama; A.Kabe; Y.Kojima; H.Nakai; K.Akai; K.Ebihara; T.Furuya; S.Mitsunobu; Y.Morita; M.Ono; Y.Yamamoto, “COMMISSIONING OF CRAB CAVITY SYSTEM”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH04, pp. XX-XX.
- D. Kr?ñmer, “Experience with Industry during the Construction of a Large Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEILA005, pp. 190-192.
- B. N. Lee, J.-S. Chai, H. W. Kim, J. H. Oh, and H. S. Song, “Design study of Electromagnet for 13MeV PET Cyclotron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO011, pp. 2415-2417.
- M. Olveg?Ñrd et al., “Spectrometry in the Test Beam Line at CTF3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE060, pp. 1113-1115.
- V. Talanov et al., “A Beam Loss Scintillator System for Background Monitoring at the LHCb Experiment”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHA03, pp. 286-288.
- D. K. Olsson, “Nonlinear Optics from Off-Energy Closed Orbits”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper TUZE2, unpublished.
- C. Gaspar et al., “The LHCb Experiment Control System: on the Path to Full Automation”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOBAUST06, pp. 20-23.
Back to search
