Favourites
For Word
[n] C. Y. Li et al., “A Permanent Magnet System for a Cyclotron Used as a Mass Spectrometer”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XB-02, pp. 561-564.
[n] S. Atencio et al., “Design, Analysis, and Fabrication of the APT Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP127, pp. 965-967.
[n] R. D. Ruth and J. M. Wang, “Vertical Fast Blow-up in a Single Bunch”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2405-2408.
[n] H. Huang et al., “A Multi-Wire Beam Profile Monitor in the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P048, pp. 2155-2157.
[n] A. T. Drobot, H. Hanerfeld, W. B. Herrmannsfeldt, K. Ko, and L. Seftor, “Numerical Simulation of High Power RF Sources”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3633-3636.
[n] P. Jardin et al., “ECRISs at GANIL Today and Tomorrow”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper FRYA01, pp. 195-199.
[n] D. Trbojevic, F. Meot, J. Berg, and S. Brooks, “Fixed tunes fast cycling permanent magnet proton FFA synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 467-470. doi:10.18429/JACoW-IPAC2024-MOPR06
[n] E. R. Beadle, “A General Purpose Fiber Optic Link with Radiation Resistance”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB09, pp. 2548-2550.
[n] S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, and H. Wang, “Eddy Current Calculations for a 1.495 GHz Injection-Locked Magnetron”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 198-200. doi:10.18429/JACoW-NAPAC2016-MOPOB58
[n] V. Derenchuk, R. Brown, H. Petri, E. Stephenson, and M. Wedekind, “Emittance Measurements of the High Intensity Polarized Ion Source at IUCF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC08, pp. 1010-1012.
[n] S. Lee et al., “Systematic Calibration of Beam Position Monitor in the High Intensity Proton Accelerator (J-PARC) LINAC”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP70, pp. 429-431.
[n] G. Wustefeld, J. Feikes, K. Holldack, and P. Kuske, “Compressed Electron Bunches for THz-Generation - Operating BESSY II in a Dedicated Low Alpha Mode”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF015, pp. 2290-2292.
[n] L. Rivkin, “Review of Future European Synchrotron Radiation Projects”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEY02T, pp. 85-89.
[n] S. Caspi et al., “Design and Construction of a 15 T, 120 mm Bore IR Quadrupole Magnet for LARP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP066, pp. 280-282.
[n] A. D. Yeremian, C. Adolphsen, R. H. Miller, C. Nantista, and J. Wang, “NLCTA Injector Experimental Results”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W013, pp. 2852-2854.
[n] Y. Li, H. P. Bohlen, and R. N. Tornoe, “IOT RF Power Sources for Pulsed and CW Linacs”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TH201, pp. 574-577.
[n] G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
[n] G. Rehm, A. F. D. Morgan, and C. Thomas, “Beam Diagnostics Systems for the Diamond Synchrotron Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT127, pp. 2765-2767.
[n] L. J. Nevay et al., “Sub-Micrometre Resolution Laserwire Transverse Beam Size Measurement System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF16, pp. 243-246.
[n] D. Xu et al., “Beam optics update for EIC HSR-IR2”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 116-119. doi:10.18429/JACoW-IPAC2023-MOPA041
[n] A. Hutton et al., “JLAB Hurricane Recovery”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF068, pp. 1102-1104.
[n] A. G. Hinton et al., “Development of a Short Period Superconducting Helical Undulator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2788-2791. doi:10.18429/JACoW-IPAC2022-THPOTK010
[n] E. Meier, G. LeBlanc, and Y. E. Tan, “Orbit Correction Studies using Neural Networks”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP057, pp. 2837-2839.
[n] T. Zolkin, I. Morozov, and S. Nagaitsev, “Understanding sextupole”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 725-728. doi:10.18429/JACoW-IPAC2024-MOPS13
[n] V. Derenchuk, R. Brown, P. Schwandt, M. Wedekind, J. Hicks, and D. Friesel, “The IUCF High Intensity Polarized Ion Source Project”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3184-3187.
[n] D. Forkel-Wirth et al., “Performance Requirements for Monitoring Pulsed, Mixed Radiation Fields around High-energy Acclerators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEOBCH01, pp. 147-149.
[n] S. L. Birch, A. Morris, and S. P. Stoneham, “Power Converters for the ISIS Second Target Station Project (TS-2)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS119, pp. 2655-2657.
[n] A. Bayramiyan, M. Akbari, M. Jafarzadeh, A. Khalilzadeh, J. Rahighi, and E. H. Yousefi, “Conceptual Design of Power Supply Control System for ILSF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1734-1735. doi:10.18429/JACoW-ICALEPCS2017-THPHA148
[n] J. Spanggaard et al., “Measurement of Vertical Emittance at LEP from Hard X-Rays”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2492-2495.
[n] L. G. Ratner et al., “Commissioning the Polarized Beam in the AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1656-1659.
[n] D. J. Ciardullo and J. M. Brennan, “The Average Orbit System Upgrade for the Brookhaven AGS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ30, pp. 2518-2520.
[n] H.-J. Eckoldt, “Power Supplies for TESLA Test Facility 2”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE099, pp. 2466-2468.
[n] S. Fu et al., “Status of the China Spallation Neutron Source Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH1GRI02, pp. 3053-3057.
[n] O. Rey Orozko, S. Doebert, and M. Jonker, “Availability Studies Comparing Drive Beam and Klystron Options for the Compact Linear Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2013-2015. doi:10.18429/JACoW-IPAC2018-WEPAF076
[n] Z. Kukuma, R. Schwartz, and S. Sithole, “Observation planning tool for the MeerKAT radio telescope”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1860-1863. doi:10.18429/JACoW-ICALEPCS2025-THPD107
[n] I. Morozov and M. Yuliya, “Applications of High-Dimensional Time-Delayed Embedding for Time Series Complexity Estimation”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5027, unpublished.
[n] F. Emanov et al., “Status of VEPP-5 injection complex”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 829-831. doi:10.18429/JACoW-IPAC2025-MOPS139
[n] F.-J. Decker, J. T. Seeman, and R. Brown, “Beam Size Measurements with Noninterceptive Off-Axis Screens”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2507-2510.
[n] S. Kidner, R. T. Kouzes, W. H. Moore, M. Yoon, and S. Oh, “Upgrading Projects for the Princeton University AVF Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-22, pp. 113-115.
[n] M. Repov et al., “Development of a New Measurement System for Beam Position Pickups in the LINAC and Beam Energy Measurement (Time of Flight) in the MEBT for Medaustron”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 238-240. doi:10.18429/JACoW-IBIC2022-TUP10
[n] J. Wei, X.-P. Li, and H. Okamoto, “Crystalline Beam Studies with Andy Sessler”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper THZAUD01, pp. 155-164.
[n] A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3165-3168.
[n] N. Delerue et al., “Study of the Performances of a 3D Printed BPM”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3656-3659. doi:10.18429/JACoW-IPAC2018-THPAL016
[n] T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2249-2251. doi:10.18429/JACoW-IPAC2021-TUPAB322
[n] U. Dorda et al., “Optimized Beam Optics Design of the MINERVA/MYRRHA Superconducting Proton Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 337-340. doi:10.18429/JACoW-LINAC2022-TUPOJO03
[n] V. G. Khachatryan, V. H. Petrosyan, and T. L. Vardanyan, “Particle Tracking Simulations for EXFEL Complex shape Collimators”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP001, pp. 22-25.
[n] E. Meier, S. Biedron, G. LeBlanc, M. J. Morgan, and J. Wu, “Electron Beam Energy Stabilization Using a Neural Network Hybrid Controller at the Australian Synchrotron Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP050, pp. 1201-1203.
[n] J. Bengtsson, W. Joho, P. Marchand, L. Rivkin, and A. Streun, “Status of the Swiss Light Source Project SLS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP102G, pp. 685-687.
[n] A. Balzer, R. Follath, D. Herrend?Ârfer, G. Reichardt, and P. Stange, “Diagnostics and Optimization Procedures for Beamline Control at BESSY”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O1_014.
[n] R. L. Cassel and J. E. Van Ness, “Direct Powering of the 200 - Ge V Synchrotron Magnets from the Utility System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 672-677.
[n] I. Bazarov et al., “Phase I Energy Recovery Linac at Cornell University”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI032, pp. 644-646.
[n] H. Freund, L. Giannessi, C. R. Frascati, and W. H. Miner, “The Effect of Shot-Noise on the Start-Up of the Fundamental and Harmonics in Free-Electron Lasers”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH003, pp. 9-12.
[n] D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2865-2868.
[n] E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC45, unpublished.
[n] S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
[n] H. Winick, “SSRL: Past Experience, Present Development, Future Plans”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3798-3801.
[n] H. Schlarb et al., “Proposal for a Sub-100 fs Electron Bunch Arrival-time Monitor for the VUV-FEL at DESY”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF020, pp. 345-347.
[n] P. Mortazavi and D. Shu, “Thermal Conductance of Metallic Interface in Vacuum”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1891-1893.
[n] A. R. Bainbridge, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Demonstration of ÔÇÿZEPTOÔÇÖ Permanent Magnet Technology on Diamond Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2370-2373. doi:10.18429/JACoW-IPAC2021-TUPAB365
[n] C. M. Jones, J. L. Fricke, B. Piosczyk, and J. E. Vetter, “A Slow Tuner for Superconducting Helically Loaded Resonant Cavities”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G02, pp. 163-167.
[n] T. Mattison, R. Cassel, A. Donaldson, H. Fischer, and D. Gough, “Pulse Shape Adjustment for the SLC Damping Ring Kickers”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3156-3159.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Y. Li et al., “A Permanent Magnet System for a Cyclotron Used as a Mass Spectrometer”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XB-02, pp. 561-564.
- S. Atencio et al., “Design, Analysis, and Fabrication of the APT Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP127, pp. 965-967.
- R. D. Ruth and J. M. Wang, “Vertical Fast Blow-up in a Single Bunch”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2405-2408.
- H. Huang et al., “A Multi-Wire Beam Profile Monitor in the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P048, pp. 2155-2157.
- A. T. Drobot, H. Hanerfeld, W. B. Herrmannsfeldt, K. Ko, and L. Seftor, “Numerical Simulation of High Power RF Sources”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3633-3636.
- P. Jardin et al., “ECRISs at GANIL Today and Tomorrow”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper FRYA01, pp. 195-199.
- D. Trbojevic, F. Meot, J. Berg, and S. Brooks, “Fixed tunes fast cycling permanent magnet proton FFA synchrotron”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR06, pp. 467-470.
- E. R. Beadle, “A General Purpose Fiber Optic Link with Radiation Resistance”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPB09, pp. 2548-2550.
- S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, and H. Wang, “Eddy Current Calculations for a 1.495 GHz Injection-Locked Magnetron”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 198-200.
- V. Derenchuk, R. Brown, H. Petri, E. Stephenson, and M. Wedekind, “Emittance Measurements of the High Intensity Polarized Ion Source at IUCF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC08, pp. 1010-1012.
- S. Lee et al., “Systematic Calibration of Beam Position Monitor in the High Intensity Proton Accelerator (J-PARC) LINAC”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP70, pp. 429-431.
- G. Wustefeld, J. Feikes, K. Holldack, and P. Kuske, “Compressed Electron Bunches for THz-Generation - Operating BESSY II in a Dedicated Low Alpha Mode”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF015, pp. 2290-2292.
- L. Rivkin, “Review of Future European Synchrotron Radiation Projects”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEY02T, pp. 85-89.
- S. Caspi et al., “Design and Construction of a 15 T, 120 mm Bore IR Quadrupole Magnet for LARP”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP066, pp. 280-282.
- A. D. Yeremian, C. Adolphsen, R. H. Miller, C. Nantista, and J. Wang, “NLCTA Injector Experimental Results”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W013, pp. 2852-2854.
- Y. Li, H. P. Bohlen, and R. N. Tornoe, “IOT RF Power Sources for Pulsed and CW Linacs”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TH201, pp. 574-577.
- G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
- G. Rehm, A. F. D. Morgan, and C. Thomas, “Beam Diagnostics Systems for the Diamond Synchrotron Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT127, pp. 2765-2767.
- L. J. Nevay et al., “Sub-Micrometre Resolution Laserwire Transverse Beam Size Measurement System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF16, pp. 243-246.
- D. Xu et al., “Beam optics update for EIC HSR-IR2”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA041, pp. 116-119.
- A. Hutton et al., “JLAB Hurricane Recovery”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF068, pp. 1102-1104.
- A. G. Hinton et al., “Development of a Short Period Superconducting Helical Undulator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2788-2791.
- E. Meier, G. LeBlanc, and Y. E. Tan, “Orbit Correction Studies using Neural Networks”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP057, pp. 2837-2839.
- T. Zolkin, I. Morozov, and S. Nagaitsev, “Understanding sextupole”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS13, pp. 725-728.
- V. Derenchuk, R. Brown, P. Schwandt, M. Wedekind, J. Hicks, and D. Friesel, “The IUCF High Intensity Polarized Ion Source Project”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3184-3187.
- D. Forkel-Wirth et al., “Performance Requirements for Monitoring Pulsed, Mixed Radiation Fields around High-energy Acclerators”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEOBCH01, pp. 147-149.
- S. L. Birch, A. Morris, and S. P. Stoneham, “Power Converters for the ISIS Second Target Station Project (TS-2)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS119, pp. 2655-2657.
- A. Bayramiyan, M. Akbari, M. Jafarzadeh, A. Khalilzadeh, J. Rahighi, and E. H. Yousefi, “Conceptual Design of Power Supply Control System for ILSF”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1734-1735.
- J. Spanggaard et al., “Measurement of Vertical Emittance at LEP from Hard X-Rays”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2492-2495.
- L. G. Ratner et al., “Commissioning the Polarized Beam in the AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1656-1659.
- D. J. Ciardullo and J. M. Brennan, “The Average Orbit System Upgrade for the Brookhaven AGS”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ30, pp. 2518-2520.
- H.-J. Eckoldt, “Power Supplies for TESLA Test Facility 2”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE099, pp. 2466-2468.
- S. Fu et al., “Status of the China Spallation Neutron Source Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH1GRI02, pp. 3053-3057.
- O. Rey Orozko, S. Doebert, and M. Jonker, “Availability Studies Comparing Drive Beam and Klystron Options for the Compact Linear Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2013-2015.
- Z. Kukuma, R. Schwartz, and S. Sithole, “Observation planning tool for the MeerKAT radio telescope”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1860-1863.
- I. Morozov and M. Yuliya, “Applications of High-Dimensional Time-Delayed Embedding for Time Series Complexity Estimation”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5027, this conference.
- F. Emanov et al., “Status of VEPP-5 injection complex”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS139, pp. 829-831.
- F.-J. Decker, J. T. Seeman, and R. Brown, “Beam Size Measurements with Noninterceptive Off-Axis Screens”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2507-2510.
- S. Kidner, R. T. Kouzes, W. H. Moore, M. Yoon, and S. Oh, “Upgrading Projects for the Princeton University AVF Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-22, pp. 113-115.
- M. Repov et al., “Development of a New Measurement System for Beam Position Pickups in the LINAC and Beam Energy Measurement (Time of Flight) in the MEBT for Medaustron”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 238-240.
- J. Wei, X.-P. Li, and H. Okamoto, “Crystalline Beam Studies with Andy Sessler”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper THZAUD01, pp. 155-164.
- A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3165-3168.
- N. Delerue et al., “Study of the Performances of a 3D Printed BPM”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3656-3659.
- T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2249-2251.
- U. Dorda et al., “Optimized Beam Optics Design of the MINERVA/MYRRHA Superconducting Proton Linac”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 337-340.
- V. G. Khachatryan, V. H. Petrosyan, and T. L. Vardanyan, “Particle Tracking Simulations for EXFEL Complex shape Collimators”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP001, pp. 22-25.
- E. Meier, S. Biedron, G. LeBlanc, M. J. Morgan, and J. Wu, “Electron Beam Energy Stabilization Using a Neural Network Hybrid Controller at the Australian Synchrotron Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP050, pp. 1201-1203.
- J. Bengtsson, W. Joho, P. Marchand, L. Rivkin, and A. Streun, “Status of the Swiss Light Source Project SLS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP102G, pp. 685-687.
- A. Balzer, R. Follath, D. Herrend?Ârfer, G. Reichardt, and P. Stange, “Diagnostics and Optimization Procedures for Beamline Control at BESSY”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O1_014.
- R. L. Cassel and J. E. Van Ness, “Direct Powering of the 200 - Ge V Synchrotron Magnets from the Utility System”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 672-677.
- I. Bazarov et al., “Phase I Energy Recovery Linac at Cornell University”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI032, pp. 644-646.
- H. Freund, L. Giannessi, C. R. Frascati, and W. H. Miner, “The Effect of Shot-Noise on the Start-Up of the Fundamental and Harmonics in Free-Electron Lasers”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH003, pp. 9-12.
- D. Li, S. Y. Lee, J. Budnick, and T. Hall, “Design and Fabrication of a Multi-Purpose Panofsky Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2865-2868.
- E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC45, unpublished.
- S. Shen et al., “Testing of Vacuum System for APT/LEDA RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA112, pp. 1333-1335.
- H. Winick, “SSRL: Past Experience, Present Development, Future Plans”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3798-3801.
- H. Schlarb et al., “Proposal for a Sub-100 fs Electron Bunch Arrival-time Monitor for the VUV-FEL at DESY”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF020, pp. 345-347.
- P. Mortazavi and D. Shu, “Thermal Conductance of Metallic Interface in Vacuum”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1891-1893.
- A. R. Bainbridge, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Demonstration of ÔÇÿZEPTOÔÇÖ Permanent Magnet Technology on Diamond Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2370-2373.
- C. M. Jones, J. L. Fricke, B. Piosczyk, and J. E. Vetter, “A Slow Tuner for Superconducting Helically Loaded Resonant Cavities”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G02, pp. 163-167.
- T. Mattison, R. Cassel, A. Donaldson, H. Fischer, and D. Gough, “Pulse Shape Adjustment for the SLC Damping Ring Kickers”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3156-3159.
Back to search