Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. R. Howard, J. E. Coleman, and S. M. Lidia, “Studying the Emission Characteristics of Field Emission Cathodes with Various Geometries”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 226-228. doi:10.18429/JACoW-NAPAC2022-MOPA79
[n] U. Wienands et al., “Status and Early Commissioning Results for the PEP-II High Energy Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B009, pp. 315-317.
[n] E. Bleser, “Results from Commissioning the AGS Booster Orbit System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3766-3769.
[n] T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2331-2334.
[n] D. Rai et al., “Design and implementation of an instrumentation & control system for cathodes and radio-frequency interactions in extremes (CARIE) project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2093-2096. doi:10.18429/JACoW-IPAC2024-WEPC57
[n] B. Sarkar, S. Bandyopadhyay, C. Datta, and D. Sarkar, “Software for Supervisory Control of the Trim Coil Power Supplies of the Kolkata Superconducting Cyclotron”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP011, pp. XX-XX.
[n] M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 878-883. doi:10.18429/JACoW-LINAC2022-FR1AA05
[n] L. Reid et al., “Acceleration of electrons from a linear accelerator by a laser driven plasma wave at CLARA”, presented at the IPAC'23, Venice, Italy, May 2023, paper THODA3, unpublished.
[n] S. Caspi et al., “Design and Construction of a 15 T, 120 mm Bore IR Quadrupole Magnet for LARP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP066, pp. 280-282.
[n] A. Laut, K. Thackston, C. Moeller, D. Packard, and H. Wang, “Models for power combining magnetrons in a magic tee”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1478-1481. doi:10.18429/JACoW-IPAC2024-TUPR26
[n] G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
[n] H. Brueck et al., “Time Dependence of Persistent-Current Field Distortions in the Superconducting HERA Magnets”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 329-332.
[n] C. Gardner and L. Ahrens, “A Method for Determining the Position, Angle and Other Injection Parameters of a Short Pulsed Beam in the Brookhaven AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1888-1891.
[n] T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2510-2513. doi:10.18429/JACoW-IPAC2023-TUPM122
[n] G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
[n] F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
[n] D. C. Nguyen et al., “Operation of the High Brightness LINAC for the Advanced Free-Electron Laser Initiative at Los Alamos”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2970-2973.
[n] D. Gordon, A. Lal, C. E. Clayton, M. Everett, and C. Joshi, “A Novel Technique for Probing theTransverse Interactions Between an Electron Beam and a Plasma”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB05, pp. 770-772.
[n] E. Naselli et al., “The First Measurement of Plasma Density by Means of an Interfero-Polarimetric Setup in a Compact ECR-Plasma Trap”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 102-106. doi:10.18429/JACoW-ECRIS2018-TUP11
[n] A. O. Borga, R. De Monte, M. Ferianis, L. Pavlovic, and M. Predonzani, “The Diagnostics' Back-End Platform Based on the In House Developed A|D|A And A|D|O Boards”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM025, pp. 163-167.
[n] L. Ahrens et al., “High Intensity Proton Acceleration at the Brookhaven AGS - An Update”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P001, pp. 89-91.
For LaTeX
Use Complete Form
For BibTeX
References
- M. R. Howard, J. E. Coleman, and S. M. Lidia, “Studying the Emission Characteristics of Field Emission Cathodes with Various Geometries”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 226-228.
- U. Wienands et al., “Status and Early Commissioning Results for the PEP-II High Energy Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6B009, pp. 315-317.
- E. Bleser, “Results from Commissioning the AGS Booster Orbit System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3766-3769.
- T. Mattison, R. Cassel, A. Donaldson, G. Gross, and A. Harvey, “Operational Experience with SLC Damping Ring Kicker Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2331-2334.
- D. Rai et al., “Design and implementation of an instrumentation & control system for cathodes and radio-frequency interactions in extremes (CARIE) project”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC57, pp. 2093-2096.
- B. Sarkar, S. Bandyopadhyay, C. Datta, and D. Sarkar, “Software for Supervisory Control of the Trim Coil Power Supplies of the Kolkata Superconducting Cyclotron”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP011, pp. XX-XX.
- M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 878-883.
- L. Reid et al., “Acceleration of electrons from a linear accelerator by a laser driven plasma wave at CLARA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THODA3, unpublished.
- S. Caspi et al., “Design and Construction of a 15 T, 120 mm Bore IR Quadrupole Magnet for LARP”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP066, pp. 280-282.
- A. Laut, K. Thackston, C. Moeller, D. Packard, and H. Wang, “Models for power combining magnetrons in a magic tee”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR26, pp. 1478-1481.
- G. W. Foster et al., “Permanent Magnet Design for the Fermilab Main Injector Recycler Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE05, pp. 1298-1300.
- H. Brueck et al., “Time Dependence of Persistent-Current Field Distortions in the Superconducting HERA Magnets”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 329-332.
- C. Gardner and L. Ahrens, “A Method for Determining the Position, Angle and Other Injection Parameters of a Short Pulsed Beam in the Brookhaven AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1888-1891.
- T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM122, pp. 2510-2513.
- G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
- F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
- D. C. Nguyen et al., “Operation of the High Brightness LINAC for the Advanced Free-Electron Laser Initiative at Los Alamos”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2970-2973.
- D. Gordon, A. Lal, C. E. Clayton, M. Everett, and C. Joshi, “A Novel Technique for Probing theTransverse Interactions Between an Electron Beam and a Plasma”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB05, pp. 770-772.
- E. Naselli et al., “The First Measurement of Plasma Density by Means of an Interfero-Polarimetric Setup in a Compact ECR-Plasma Trap”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 102-106.
- A. O. Borga, R. De Monte, M. Ferianis, L. Pavlovic, and M. Predonzani, “The Diagnostics' Back-End Platform Based on the In House Developed A|D|A And A|D|O Boards”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM025, pp. 163-167.
- L. Ahrens et al., “High Intensity Proton Acceleration at the Brookhaven AGS - An Update”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P001, pp. 89-91.
Back to search