Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. T. Tinta et al., “Precise Generation and Distribution System of RF Reference Signal for SKIF Accelerator Complex”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper THB01, unpublished.
[n] H. Huang et al., “A Multi-Wire Beam Profile Monitor in the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P048, pp. 2155-2157.
[n] S. H. Kim et al., “SRF R&D for FRIB Linac Energy Upgrade with High-performance Medium-beta Elliptical Cavity CW Cryomodules”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper FRIBA01, unpublished.
[n] D. Khan and T. O. Raubenheimer, “Approximated Expressions for the Coherent Synchrotron Radiation Effect in Bending Magnets”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 300-304. doi:10.18429/JACoW-FEL2017-TUP028
[n] S. V. Grigorenko, P. Strokach, Ju. A. Svistunov, and Ju. V. Zuev, “Negative Ion Beam Forming in Linac Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 718-721.
[n] P. Cameron et al., “The RHIC Ionization Beam Profile Monitor”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA101, pp. 2114-2116.
[n] U. Trinks, “The Superconducting Separated Orbit Cyclotron Triton”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-11, pp. XX-XX.
[n] E. Gluskin, “Superconducting Undulators - A Novel Source of Radiation for Synchrotron and FEL Light Sources”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper MOIO01, pp. XX-XX.
[n] H. H. Lu et al., “Development of a PrFeB Cryogenic Permanent Magnet Undulator (CPMU) Prototype at IHEP”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1469-1471. doi:10.18429/JACoW-IPAC2017-TUPAB064
[n] Y. Yan et al., “Developing Criteria for Laser Transverse Instability in LWFA Simulations”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 855-857. doi:10.18429/JACoW-NAPAC2019-WEPLO05
[n] F. G. Eysselein, W. G, J. Vlogaert, and D. Perini, “Measurement of Young's Modulus and Shim Calculation for LHC Prototype Dipole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P009, pp. 3410-3412.
[n] D. T. Abell, G. I. Bell, E. Forest, and A. V. Sobol, “Simulation of Space-Charge Effects in an FFAG Using PTC”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA34, pp. 183-183.
[n] J. Kallestrup and X. Gu, “Possible Application of Round-to-Flat Hadron Beam Creation Using 3rd Order Coupling Resonances for the Electron-Ion Collider”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 99-102. doi:10.18429/JACoW-IPAC2021-MOPAB019
[n] G. Strangolino and L. Zambon, “canone3: A New Service and Development Framework for the Web and Platform Independent Applications”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 1023-1028. doi:10.18429/JACoW-ICALEPCS2021-FRAR02
[n] C. Qian et al., “Development of LECR4 Ion Source for Intense Beam Production and LECR5 for SESRI Project”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 188-190. doi:10.18429/JACoW-ECRIS2018-THA4
[n] I. Hofmann and R. D. Ryne, “Coherent Coupling Criterion for Three-Dimensional Halo Formation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBL5, pp. 137-139.
[n] T. Sieber et al., “Optimization of the Cryogenic Current Comparator (CCC) for Beam Intensity Measurement”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 503-506. doi:10.18429/JACoW-IBIC2017-TH2AB3
[n] W. Merz, S. Sarkar, and F. Meyer, “Proposal to Use Failure Prediction as a Means of Meeting Availability Requirements at the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1841-1844.
[n] C. Reece and R. Sundelin, “Simulation of Multiturn Transverse Instabilities in Electron Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2350-2353.
[n] J. Haimson, “Non-Cryogenic High Duty Cycle Electron Linear Accelerators”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper H-9, pp. 775-802.
[n] S. A. Artamonov, A. N. Chernov, E. M. Ivanov, and G. A. Riabov, “Highly Accurate 3D Modeling of the C-80 Isochronous Cyclotron Magnetic Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC015, pp. 475-477.
For LaTeX
Use Complete Form
For BibTeX
References
- D. T. Tinta et al., “Precise Generation and Distribution System of RF Reference Signal for SKIF Accelerator Complex”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper THB01, unpublished.
- H. Huang et al., “A Multi-Wire Beam Profile Monitor in the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P048, pp. 2155-2157.
- S. H. Kim et al., “SRF R&D for FRIB Linac Energy Upgrade with High-performance Medium-beta Elliptical Cavity CW Cryomodules”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper FRIBA01, unpublished.
- D. Khan and T. O. Raubenheimer, “Approximated Expressions for the Coherent Synchrotron Radiation Effect in Bending Magnets”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 300-304.
- S. V. Grigorenko, P. Strokach, Ju. A. Svistunov, and Ju. V. Zuev, “Negative Ion Beam Forming in Linac Injector”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 718-721.
- P. Cameron et al., “The RHIC Ionization Beam Profile Monitor”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA101, pp. 2114-2116.
- U. Trinks, “The Superconducting Separated Orbit Cyclotron Triton”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-11, pp. XX-XX.
- E. Gluskin, “Superconducting Undulators - A Novel Source of Radiation for Synchrotron and FEL Light Sources”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper MOIO01, pp. XX-XX.
- H. H. Lu et al., “Development of a PrFeB Cryogenic Permanent Magnet Undulator (CPMU) Prototype at IHEP”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1469-1471.
- Y. Yan et al., “Developing Criteria for Laser Transverse Instability in LWFA Simulations”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 855-857.
- F. G. Eysselein, W. G, J. Vlogaert, and D. Perini, “Measurement of Young's Modulus and Shim Calculation for LHC Prototype Dipole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P009, pp. 3410-3412.
- D. T. Abell, G. I. Bell, E. Forest, and A. V. Sobol, “Simulation of Space-Charge Effects in an FFAG Using PTC”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA34, pp. 183-183.
- J. Kallestrup and X. Gu, “Possible Application of Round-to-Flat Hadron Beam Creation Using 3rd Order Coupling Resonances for the Electron-Ion Collider”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 99-102.
- G. Strangolino and L. Zambon, “canone3: A New Service and Development Framework for the Web and Platform Independent Applications”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 1023-1028.
- C. Qian et al., “Development of LECR4 Ion Source for Intense Beam Production and LECR5 for SESRI Project”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 188-190.
- I. Hofmann and R. D. Ryne, “Coherent Coupling Criterion for Three-Dimensional Halo Formation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUBL5, pp. 137-139.
- T. Sieber et al., “Optimization of the Cryogenic Current Comparator (CCC) for Beam Intensity Measurement”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 503-506.
- W. Merz, S. Sarkar, and F. Meyer, “Proposal to Use Failure Prediction as a Means of Meeting Availability Requirements at the SSC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1841-1844.
- C. Reece and R. Sundelin, “Simulation of Multiturn Transverse Instabilities in Electron Storage Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2350-2353.
- J. Haimson, “Non-Cryogenic High Duty Cycle Electron Linear Accelerators”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper H-9, pp. 775-802.
- S. A. Artamonov, A. N. Chernov, E. M. Ivanov, and G. A. Riabov, “Highly Accurate 3D Modeling of the C-80 Isochronous Cyclotron Magnetic Structure”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC015, pp. 475-477.
Back to search
