Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Appel and O. Boine-Frankenheim, “Simulation of Space Effects During Multiturn Injection into the GSI SIS18 Synchrotron”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper MOSCC2, pp. 37-39.
[n] G. A. Filatov et al., “Irradiation Methods and Infrastructure Concepts of New Beam Lines for NICA Applied Research”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2498-2501. doi:10.18429/JACoW-IPAC2021-TUPAB415
[n] E. Y. Wildner, F. Borgnolutti, F. Cerutti, M. Mauri, A. Mereghetti, and E. Todesco, “Parametric Study of Energy Deposition in the LHC Inner Triplet for the Phase 1 Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP032, pp. 2590-2592.
[n] V. Anashin et al., “Photodesorption and Power Testing of the SR Crotch-Absorber for BESSY-II”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP06D, pp. 2163-2165.
[n] Y. Piao, R. J. Dejus, M. F. Qian, I. Vasserman, and J. Z. Xu, “Magnetic Shims Studies for APS-U Hybrid Permanent Magnet Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3941-3944. doi:10.18429/JACoW-IPAC2021-THPAB077
[n] L. Groening et al., “Recent Studies of Beam Physics for Ion Linacs”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 200-205. doi:10.18429/JACoW-HB2018-WEA2WB02
[n] N. Y. Huang, W. K. Lau, A. P. Lee, A. Chao, J. Wu, and C. H. Chen, “Linac Design for the Proposed NSRRC THz/VUV FEL Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2971-2973. doi:10.18429/JACoW-IPAC2014-THPRO047
[n] K. H. Hsu et al., “Design Modifications and Installation of the Injection Girder System in the Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1968-1970. doi:10.18429/JACoW-IPAC2014-WEPRO013
[n] D. A. Dimitrov et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Amplifier for Photocathodes”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS020, pp. 3555-3557.
[n] G. Burt et al., “Prototype Development of the CLIC Crab Cavities”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP013, pp. 856-859.
[n] W. Busse et al., “Can We Make a Control System Do What the Operator Wants?”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper H-01, pp. 548-554.
[n] J. B. Jeanneret and H.-H. Braun, “Optimisation of a Beam Transfer FODO Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC017, pp. 3014-3016.
[n] B. H. Smith, “Survey of R-F Techniques Applicable to Variable-Energy Cyclotrons”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C05, pp. 159-166.
[n] J. Seok, M. Chung, M. E. Conde, G. Ha, and J. G. Power, “Suppression of Correlated Energy Spread Using Emittance Exchange”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3275-3278. doi:10.18429/JACoW-IPAC2019-WEPTS066
[n] J. Wieland et al., “Improved measurements of nonlinear integrable optics at IOTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3230-3232. doi:10.18429/JACoW-IPAC2023-WEPL052
[n] A. Lumpkin, B. Yang, W. Gai, and W. Cieslik, “Initial Tests of the Dual-Sweep Streak Camera System Planned for APS Particle-Beam Diagnostics”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ11, pp. 2476-2478.
[n] O. Felden, N. Demary, N.-O. Fr?Âhlich, R. Gebel, M. Rimmler, and Y. Valdau, “Recent Extensions of JULIC for HBS Investigations”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 195-198. doi:10.18429/JACoW-CYCLOTRONS2019-TUP019
[n] C. H. Huang et al., “Online RadFET Reader for Beam Loss Monitoring System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1097-1099. doi:10.18429/JACoW-IPAC2015-MOPTY070
[n] D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319.
[n] E. Acerbi, G. Bellomo, M. Castiglioni, E. Fabrici, and F. Resmini, “Beam Extraction Studies for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1115-1118.
[n] W. L. Gagnon and B. H. Smith, “Simplified Design Techniques for Distributed Power Amplifiers for Synchrotron and Cyclotron Driver Applications”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 551-556.
[n] J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2320-2323.
[n] E. Feldmeier, Th. Haberer, A. Peters, C. Sch?Âmers, and R. Steiner, “Magnetic Field Correction in Normal Conducting Synchrotrons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD004, pp. 675-677.
[n] W. Beeckman et al., “The C235 IBA-SHI Protontherapy Cyclotron for the NPTC Project: Progress Report of the Magnetic Field Mapping and Shimming”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-14, pp. 222-225.
[n] D. Luo et al., “Analysis of High Field Q-Slope (HFQS) Causes and Development of New Chemical Polishing Acid”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 699-702. doi:10.18429/JACoW-NAPAC2019-WEPLM47
[n] M. G. Mazarakis, R. J. Adler, R. B. Miller, S. L. Shope, and D. L. Smith, “Intense Electron Beam Autogenerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3171-3174.
[n] J. Cardona, S. Peggs, F. Pilat, V. Ptitsyn, and T. Satogata, “Determination of Linear and Non Linear Components in RHIC Interaction Regions from Difference Orbit Measurements”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE060, pp. 311-313.
[n] J. Wu et al., “X-ray Spectra and Peak Power Control with iSASE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEODB101, pp. 2068-2070.
[n] M. G. Mazarakis et al., “Experiments Investigating the Effects of the Accelerating Gap Voltage Pulse on the Ion Focused (IFR) High Current Electron Recirculators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3126-3129.
[n] S. Ghosh et al., “Commissioning of Superconducting Linac at IUAC - Initial Challenges and Solutions”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP127, pp. 856-858.
[n] T. Kracht et al., “The Computing Model of the Experiments at PETRA III”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU003, pp. 44-47.
[n] R. Tiede, G. Clemente, S. Minaev, H. Podlech, U. Ratzinger, and A. C. Sauer, “LORASR Code Development”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH118, pp. 2194-2196.
[n] V. P. Yakovlev et al., “Status of the SRF Development for the Project X”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP015, pp. 117-122.
[n] A. Romanov et al., “Commissioning of the IOTA proton injector”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPR32, unpublished.
[n] T. T. Arkan et al., “LCLS-II Cryomodules Production at Fermilab”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2652-2655. doi:10.18429/JACoW-IPAC2018-WEPMK010
[n] M. Watanabe et al., “A Broad-Band RF Cavity Using Finemet Cut Cores as a Buncher of Ion Beams”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16026, pp. XX-XX.
[n] A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3165-3168.
[n] J. E. Clendenin, G. A. Loew, R. H. Miller, J.-L. Pellegrin, and J. B. Truher, “Single Bunch Beam Measurements for the Proposed SLAC Linear Collider”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2452-2455.
[n] R. Richter et al., “Operation of New RF Drivers for the Bevatron Local Injector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1160-1163.
[n] D. L. Smart and B. H. Smith, “Investigation of the Characteristics of Ceramic Capacitators for Synchrotron Kicker-Magnet Applications”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 772-775.
[n] Y.-C. Chae and L. H. Morrison, “The Collective Effects of Long Straight Sections (LSSs) in the Advanced Photon Source Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR082, pp. 3120-3122.
[n] W. Kleeven et al., “Injection And Central Region Design For The Iba C70 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 66-68.
[n] G. Rumolo, J. B. Jeanneret, Y. Papaphilippou, and D. Quatraro, “Collective Effects in the CLIC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP049, pp. 658-660.
[n] Sicard C.H., “Industrial Controls for the Test Setup of the Atlas Barrel Toroid Superconducting Magnets”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper TC1P30, pp. XX-XX.
[n] A. P. Lee et al., “Status of the Photo-Injector Development at NSRRC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP081, pp. 563-565.
[n] J. M. Watson et al., “A High Intensity 1.5 Megavolt Heavy Ion Preaccelerator for Ion Beam Fusion”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3098-3101.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Appel and O. Boine-Frankenheim, “Simulation of Space Effects During Multiturn Injection into the GSI SIS18 Synchrotron”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper MOSCC2, pp. 37-39.
- G. A. Filatov et al., “Irradiation Methods and Infrastructure Concepts of New Beam Lines for NICA Applied Research”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2498-2501.
- E. Y. Wildner, F. Borgnolutti, F. Cerutti, M. Mauri, A. Mereghetti, and E. Todesco, “Parametric Study of Energy Deposition in the LHC Inner Triplet for the Phase 1 Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP032, pp. 2590-2592.
- V. Anashin et al., “Photodesorption and Power Testing of the SR Crotch-Absorber for BESSY-II”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP06D, pp. 2163-2165.
- Y. Piao, R. J. Dejus, M. F. Qian, I. Vasserman, and J. Z. Xu, “Magnetic Shims Studies for APS-U Hybrid Permanent Magnet Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3941-3944.
- L. Groening et al., “Recent Studies of Beam Physics for Ion Linacs”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 200-205.
- N. Y. Huang, W. K. Lau, A. P. Lee, A. Chao, J. Wu, and C. H. Chen, “Linac Design for the Proposed NSRRC THz/VUV FEL Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2971-2973.
- K. H. Hsu et al., “Design Modifications and Installation of the Injection Girder System in the Taiwan Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1968-1970.
- D. A. Dimitrov et al., “3D Simulations of Secondary Electron Generation and Transport in a Diamond Amplifier for Photocathodes”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS020, pp. 3555-3557.
- G. Burt et al., “Prototype Development of the CLIC Crab Cavities”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP013, pp. 856-859.
- W. Busse et al., “Can We Make a Control System Do What the Operator Wants?”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper H-01, pp. 548-554.
- J. B. Jeanneret and H.-H. Braun, “Optimisation of a Beam Transfer FODO Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC017, pp. 3014-3016.
- B. H. Smith, “Survey of R-F Techniques Applicable to Variable-Energy Cyclotrons”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C05, pp. 159-166.
- J. Seok, M. Chung, M. E. Conde, G. Ha, and J. G. Power, “Suppression of Correlated Energy Spread Using Emittance Exchange”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3275-3278.
- J. Wieland et al., “Improved measurements of nonlinear integrable optics at IOTA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL052, pp. 3230-3232.
- A. Lumpkin, B. Yang, W. Gai, and W. Cieslik, “Initial Tests of the Dual-Sweep Streak Camera System Planned for APS Particle-Beam Diagnostics”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ11, pp. 2476-2478.
- O. Felden, N. Demary, N.-O. Fr?Âhlich, R. Gebel, M. Rimmler, and Y. Valdau, “Recent Extensions of JULIC for HBS Investigations”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 195-198.
- C. H. Huang et al., “Online RadFET Reader for Beam Loss Monitoring System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1097-1099.
- D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319.
- E. Acerbi, G. Bellomo, M. Castiglioni, E. Fabrici, and F. Resmini, “Beam Extraction Studies for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1115-1118.
- W. L. Gagnon and B. H. Smith, “Simplified Design Techniques for Distributed Power Amplifiers for Synchrotron and Cyclotron Driver Applications”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 551-556.
- J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2320-2323.
- E. Feldmeier, Th. Haberer, A. Peters, C. Sch?Âmers, and R. Steiner, “Magnetic Field Correction in Normal Conducting Synchrotrons”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD004, pp. 675-677.
- W. Beeckman et al., “The C235 IBA-SHI Protontherapy Cyclotron for the NPTC Project: Progress Report of the Magnetic Field Mapping and Shimming”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-14, pp. 222-225.
- D. Luo et al., “Analysis of High Field Q-Slope (HFQS) Causes and Development of New Chemical Polishing Acid”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 699-702.
- M. G. Mazarakis, R. J. Adler, R. B. Miller, S. L. Shope, and D. L. Smith, “Intense Electron Beam Autogenerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3171-3174.
- J. Cardona, S. Peggs, F. Pilat, V. Ptitsyn, and T. Satogata, “Determination of Linear and Non Linear Components in RHIC Interaction Regions from Difference Orbit Measurements”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE060, pp. 311-313.
- J. Wu et al., “X-ray Spectra and Peak Power Control with iSASE”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEODB101, pp. 2068-2070.
- M. G. Mazarakis et al., “Experiments Investigating the Effects of the Accelerating Gap Voltage Pulse on the Ion Focused (IFR) High Current Electron Recirculators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3126-3129.
- S. Ghosh et al., “Commissioning of Superconducting Linac at IUAC - Initial Challenges and Solutions”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP127, pp. 856-858.
- T. Kracht et al., “The Computing Model of the Experiments at PETRA III”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOMAU003, pp. 44-47.
- R. Tiede, G. Clemente, S. Minaev, H. Podlech, U. Ratzinger, and A. C. Sauer, “LORASR Code Development”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH118, pp. 2194-2196.
- V. P. Yakovlev et al., “Status of the SRF Development for the Project X”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP015, pp. 117-122.
- A. Romanov et al., “Commissioning of the IOTA proton injector”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR32, unpublished.
- T. T. Arkan et al., “LCLS-II Cryomodules Production at Fermilab”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2652-2655.
- M. Watanabe et al., “A Broad-Band RF Cavity Using Finemet Cut Cores as a Buncher of Ion Beams”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16026, pp. XX-XX.
- A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3165-3168.
- J. E. Clendenin, G. A. Loew, R. H. Miller, J.-L. Pellegrin, and J. B. Truher, “Single Bunch Beam Measurements for the Proposed SLAC Linear Collider”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2452-2455.
- R. Richter et al., “Operation of New RF Drivers for the Bevatron Local Injector”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1160-1163.
- D. L. Smart and B. H. Smith, “Investigation of the Characteristics of Ceramic Capacitators for Synchrotron Kicker-Magnet Applications”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 772-775.
- Y.-C. Chae and L. H. Morrison, “The Collective Effects of Long Straight Sections (LSSs) in the Advanced Photon Source Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR082, pp. 3120-3122.
- W. Kleeven et al., “Injection And Central Region Design For The Iba C70 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 66-68.
- G. Rumolo, J. B. Jeanneret, Y. Papaphilippou, and D. Quatraro, “Collective Effects in the CLIC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP049, pp. 658-660.
- Sicard C.H., “Industrial Controls for the Test Setup of the Atlas Barrel Toroid Superconducting Magnets”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper TC1P30, pp. XX-XX.
- A. P. Lee et al., “Status of the Photo-Injector Development at NSRRC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP081, pp. 563-565.
- J. M. Watson et al., “A High Intensity 1.5 Megavolt Heavy Ion Preaccelerator for Ion Beam Fusion”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3098-3101.
Back to search